Redmi K60 Extreme Edition

processor

Dimensity 9200+

TSMC’s second generation 4nm process

CPU: eight-core processor, maximum frequency 3.35GHz

GPU: Immortalis-G715 MC11

Frame insertion chip

Independent graphics chip X7

144FPS ultra-high frame rate

1.5K super resolution

Memory and Capacity

24GB + 1TB up to optional

Memory: 12GB/16GB/24GB

Storage: 256GB/512GB/1TB

LPDDR5x memory (up to 8533Mbps)

UFS4.0 flash memory (sequential read speed up to 4000MB/sec)

Note: The actual available capacity will be reduced and vary due to many factors: Since the operating system occupies part of the memory (RAM), the actual available space is less than the marked memory capacity;

Since the installation of the operating system and pre-installed programs occupy part of the flash memory (ROM), the actual available storage space is less than the marked flash memory capacity.

physical dimension

Height: 162.15mm

Width: 75.7mm

Thickness: 8.49mm

Weight: 204g

Note: The above data is Xiaomi laboratory test data. The actual results may be slightly different depending on different measurement methods in the industry.

Screen and fingerprint

1.5K high brightness and high refresh rate

Dimensions: 6.67 inches

Resolution: 2712*1220

Contrast ratio: 5,000,000:1

Peak brightness: 2600nit

Display frame rate: up to 144Hz

Touch sampling rate: up to 480Hz

Ultra-high frequency PWM dimming: up to 2880Hz 

12bit color depth (68.7 billion colors) | DCI-P3 color gamut | Professional primary color screen | Ambient color temperature sensing | Sunshine screen | Classic eye protection | Paper eye protection | HDR10+ | HDR Vivid | Dolby Vision |

Frame-sharing ultra-high definition | High-frequency PWM dimming | Optical under-screen fingerprint | Dark light unlocking | Heart rate detection

Charging and Battery

5000mAh（typ）

Built-in lithium-ion polymer battery, non-removable

Xiaomi Pengpai P1 charging chip

Xiaomi Pengpai G1 self-developed fuel gauge chip

120W wired fast charging

The phone supports PD2.0/PD3.0 fast charging protocol

USB Type-C double-sided charging interface

Standard 120W charger, compatible with PD charging protocol

imaging system

Sony IMX800 outsole camera

Sony main camera: 54MP/50MP (total/effective) sensor | OIS optical image stabilization | 1/1.49″ sensor | 4in1 2.0μm fused pixels | 7P lens | f/1.7 aperture

8-megapixel ultra-wide-angle lens: 119° FOV

2 million pixel macro lens

Xiaomi Imaging Brain 2.0

EIS Electronic Image Stabilization | Full Link P3 | Everything Focus 2.0 | AI Capture | HDR 10+ | Film Camera | Film Frame | Cute Shot 4.0 | Ultra-clear Portrait Algorithm | Real-time Text Extraction | Document Mode 4.0 |

Movie frame | Movie filter | Voice-activated photography | Exposure feedback | Timed continuous shooting | Voice subtitles | Dynamic photos (livephoto) | Microfilm | AI watermark | AI camera | ID card copy mode

8K video shooting: 24FPS

4K video shooting: 30/60FPS

1080p video shooting: 30/60FPS

1080p slow motion video shooting: 120FPS/240FPS/960FPS

720p video shooting: 30FPS

720p slow motion video shooting: 120FPS/240FPS/960FPS

Front-facing 20-megapixel high-definition portrait camera, Sony IMX596

Screen fill light｜Volume button countdown photo｜Super night view｜Ultra wide panorama｜Voice controlled photography｜Timed continuous shooting｜Cute photo 4.0｜Micro movie｜Time-lapse photography｜Voice subtitles｜Dynamic photos (livephoto)｜

AI watermark｜Portrait beautification｜Face recognition｜Video beautification｜Kaleidoscope｜Video tag

1080p video shooting: 30FPS

720p video shooting: 30FPS

1080p slow motion video shooting: 120FPS

720p slow motion video shooting: 120FPS

Network and format

Dual SIM 5G | Full Netcom 8.0

Supports dual Nano-SIM card slots, allowing 5G network deployment regardless of operator 

Support dual-SIM dual-pass, dual-SIM high-definition voice 

Note: Whether 5G is supported depends on the local operator network;

Note: Dual-SIM dual-pass only supports some frequency band combinations of 5G+5G and 5G+4G. The actual usage depends on the operator's local network and business deployment.

Support frequency band

5G: n1/n3/n5/n8/n28a/n66/n38/n41/n77/n78

Note: Actual network and frequency band usage depends on local operator deployment; n28A (Tx: 703-733MHz, Rx: 758-788MHz).

4G: FDD-LTE: B1/B3/B4/B5/B8/B18/B19/B26/B66

TDD-LTE: B34/B38/B39/B40/B41/B42

Note: LTE B41 (2496-2690 194MHz);

3G: WCDMA: B1/B4/B5/B6/B8/B19

2G: GSM: B3/B5/B8; CDMA 1X: BC0

Supports 4x4 MIMO antenna technology "HPUE" HORxD

Data Connections

WLAN protocols: Wi-Fi 6, Wi-Fi 5, Wi-Fi 4 and 802.11a/b/g

WLAN frequency: 2.4G Wi-Fi | 5G Wi-Fi

Support 2x2 MIMO, Wi-Fi Direct, Miracast, 2.4G, 5G dual-channel concurrent

BluetoothBluetooth 5.4

Support: AAC/LDAC/LHDC 5.0/LC3/ASHA/Auracast

Navigation and positioning

Beidou: B1I+B1C+B2a+B2b｜GPS: L1+L5｜Galileo: E1+E5a

GLONASS: G1｜QZSS: L1+L5｜NavIC｜A-GPS｜

Data network positioning | Wi-Fi network positioning | sensor assisted positioning

video audio

Stereo dual speakers

MP3, FLAC, AAC, OGG, WAV, AMR, AWB

Hi-Res Audio Certification | Hi-Res Wireless Certification | Dolby Atmos

MP4, MKV, AVI, WMV, WEBM, 3GP, ASF playback

Support HDR10/10+ video

sensor

Optical distance sensor | 360° front and rear dual light sensors | acceleration sensor | ambient color temperature sensor | electronic compass | gyroscope | infrared remote control |

Flicker sensor｜X-axis linear motor

NFC function

After activating NFC-related services in the wallet App, you can use functions such as transportation cards, Mi Pay, door cards, and car keys by double-clicking the power button.

Mi Pay: Supports online App payment, offline card swiping, QR code payment, and UnionPay label tap payment. QR code payment supports UnionPay standard QR code main scanning and scanned payment.

Door cards: physical door cards, smart door locks, community door cards, custom blank cards. (Only can simulate door cards with a frequency band of 13.56MHz, bank cards with door card functions and stored value consumption, bus consumption, etc.

Even if the functional door cards are successfully simulated, these cards do not have banking, public transportation, etc. functions)

Car key: supports mobile phone NFC functions such as unlocking and starting the engine.

operating system

MIUI 14

packing list

Mobile phone host | Power adapter | USB Type-C data cable | Mobile phone protective case | Film (covered on the screen) | Pins | Instructions (including three-pack voucher)